W skrócie
- A refrigerated body is an insulated box with a refrigeration unit that keeps a set temperature whatever the weather.
- The unit is what separates it from an insulated body, which only slows down temperature change.
- For international carriage of perishable food the vehicle needs an ATP certificate, e.g. class FRC for any set point from +12 °C to −20 °C.
- Carrying frozen food requires a temperature recorder compliant with EN 12830. Records are kept for at least one year.
- 2.60 m maximum width of a reefer body with walls of 45 mm or more
- K ≤ 0.40 W/m²K for heavy insulation
- 1 year minimum retention of frozen-food temperature records
What a refrigerated body is made of
The base is a box of sandwich panels: a polyurethane foam core between GRP or metal skins. The refrigeration unit sits on the front wall. An independent unit has its own engine or power supply; a dependent unit is driven by the vehicle engine, which the ATP marking shows with the letter X.
The box also gets sealed doors, a washable floor, air ducts under the roof and a temperature recorder. Distribution reefers often have side doors and partitions for several compartments.
What refrigerated bodies are used for
The ranges are indicative. The shipper's requirements and the product specification are what count.
| Load | Typical range | What to watch |
|---|---|---|
| Fruit and vegetables | +2 to +12 °C | ventilation and humidity |
| Meat and dairy | 0 to +7 °C | floor hygiene, ATP class |
| Frozen food, ice cream | −18 °C and below | class C or F, EN 12830 recorder |
| Pharmaceuticals | usually +2 to +8 °C or +15 to +25 °C | GDP guidelines, temperature control |
| Flowers | +2 to +8 °C | gentle air flow |
When the rules require a refrigerated body
The ATP Agreement covers the international carriage of perishable foodstuffs. The vehicle needs an ATP certificate matching the load temperature. Class C allows any set point from +12 °C to −20 °C and requires heavy insulation with a K coefficient no higher than 0.40 W/m²K.
For quick-frozen food, Regulation (EC) No 37/2005 requires temperature recorders compliant with EN 12830, EN 13485 and EN 13486, and records must be kept for at least one year. For medicines the reference is the GDP guidelines (2013/C 343/01): the supplier is responsible for keeping temperature conditions during transport.
A reefer body may be wider than other bodies
Directive 96/53/EC allows a width of 2.60 m for vehicles carrying goods at controlled temperatures if each side wall, insulation included, is at least 45 mm thick. Other vehicles are limited to 2.55 m. The extra 5 cm offsets the thicker walls and keeps enough internal width for pallets.
What to put in a refrigerated body enquiry
- Load and temperature: including multi-temperature loads
- Target ATP class: e.g. FRC or FRA
- Capacity: pallet count or internal dimensions
- Unit: independent or dependent, night work, noise level
- Doors and partitions: side doors, number of compartments
- Chassis: GVW and wheelbase, or ask the builder to source one
Frequently asked questions
What is the difference between a refrigerated and an insulated body?
A refrigerated body has a unit that holds a set temperature. An insulated body only has insulated walls and slows down temperature change.
Is a refrigerated body always needed to carry food?
No. It depends on the product, the required temperature and the route. For international carriage of perishable food the vehicle needs an ATP certificate of the right class.
What is the maximum width of a refrigerated body?
2.60 m if the side walls, insulation included, are at least 45 mm thick (Directive 96/53/EC). Other vehicles are limited to 2.55 m.
Sources
- UNECE: ATP Agreement, Annex 1 (treaty text)
- UNECE WP.11: ATP classes A–F, mechanically refrigerated equipment
- EUR-Lex: Council Directive 96/53/EC (weights and dimensions of road vehicles)
- EUR-Lex: Regulation (EC) No 37/2005 (temperature monitoring of quick-frozen foodstuffs)
- EUR-Lex: Guidelines on Good Distribution Practice of medicinal products (2013/C 343/01)
Trucklo routes truck bodywork enquiries to manufacturers who build them.