Most problems with a new body do not come from poor workmanship. They come from decisions made before the order, when everything could still be changed at no cost.
Here are the five mistakes that come up most often, and how to avoid them.
1. Choosing the body by its name, not by the load
“We need a box” or “we want a tipper” is only a start. The producer needs to know exactly what will be carried, how much it weighs, how it is loaded and where it is unloaded. The same name hides configurations that differ in price, weight and usefulness.
How to avoid it: start the brief with the load and the way the vehicle works. The producer will pick or confirm the body name.
2. Ignoring payload
The body, tail lift, crane or refrigeration unit has its own weight. Once fitted, payload often drops much further than the buyer expected. On a 3.5 t GVW van, surprisingly little capacity can remain.
How to avoid it: ask the producer, in writing and before you sign, for a payload calculation for that chassis and configuration.
3. An incomplete request for quotation
“How much is a refrigerated body?” has no good answer. The producer either quotes a rough price that will change, or asks a dozen questions you will have to answer anyway.
How to avoid it: state the load, dimensions or pallet count, chassis, equipment and deadline up front. Then the offers are specific and comparable.
4. Comparing only the final price
Two offers for “the same” body often cover different things: insulation thickness, floor material, tail lift, warranty scope. The cheaper offer is cheaper because it is for something else.
How to avoid it: send every producer the same brief and compare line by line, not only the figure at the bottom.
5. Buying only for today’s work
A body works for years. A new customer, a different load or longer routes quickly turn a vehicle bought only for current jobs into a constraint.
How to avoid it: tell the producer about your plans. A small change, such as a prep for a unit or curtain-side fixings, can avoid a rebuild in two years.
What else to avoid
- ordering the chassis before talking to the bodybuilder,
- leaving documents and type approval until handover,
- not agreeing who will service the body, and where,
- setting a deadline without checking chassis availability.
Common questions
How many offers should you collect? Enough to compare them properly. A few offers from producers who actually build that body type are worth more than a dozen random ones.
Can the order change during the build? It depends on the stage. Early changes are usually simple. After production starts they can mean an extra charge and a later delivery.
On trucklo you describe the body once: load, chassis, dimensions, deadline. The same brief goes to several producers who really build that body, so the offers cover the same thing and can be compared.