Skip to content
For buyers

Common truck body failures and how to avoid them

Hydraulics, tail lifts, doors, refrigeration units, insulation and curtains. Typical faults, their causes and simple ways to stop them recurring.

Trucklo editorial team Updated: · 3 min read
Common truck body failures and how to avoid them

W skrócie

  • Most failures involve hydraulics, electrics, doors and locks, and equipment such as tail lifts and refrigeration units.
  • Many faults start with how the body is used: overloading, uneven loading, forklift impacts.
  • A punctured reefer wall needs prompt repair, because moisture in the insulation degrades it.
  • Daily checks and driver training catch many faults early.

Typical failures and their causes

AreaSymptomsCommon cause
Hydraulics (tipper, hooklift, crane)leaks, pressure loss, slow operationworn hoses and seals, contaminated oil
Tail liftwill not lift, platform drifts downflat battery, corroded contacts, leaks
Doors and lockshard to close, poor sealingworn hinges and seals, impacts
Refrigeration unitnot holding temperature, alarmsdirty condenser, belt, filters, missed service
Walls and insulationdents, damploading impacts, unrepaired punctures
Tarpaulin, curtaintears, slacksnagging, poor tensioning, worn buckles
Subframecracks, playoverloading, mounting outside guidelines

How the body is used matters

Many faults start with how the body is worked. An overloaded box, an unevenly stacked load, forklift knocks on walls and floor, tipping on a slope. Short training for drivers and operators on using the body is a simple way to cut this kind of damage.

Reefers: punctures and moisture

A punctured reefer wall is more than a cosmetic defect. Moisture that gets into the foam degrades the insulation, and the next ATP test may show it. Such damage should be repaired promptly and as the body builder recommends.

How to reduce failures

  • Daily checks: lights, doors, leaks, tarpaulin
  • Services as per manuals: body and equipment
  • Correct loading: within payload, evenly spread
  • Operator training: tail lift, crane, tipping, refrigeration unit
  • Prompt repairs: especially insulation punctures and corrosion spots

Frequently asked questions

What are the most common truck body failures?

Hydraulic leaks, electrical and tail lift faults, worn doors, locks and seals, and refrigeration unit failures.

How can I avoid body failures?

Do daily checks, keep to service intervals, load within payload and repair damage promptly.

Does a damaged reefer wall affect ATP?

It can. Moisture in the insulation degrades it, which may show up at the next ATP test.

Find the right producer

See what we have prepared for you.

Wyślij zapytanie Gotowe od ręki
Trucklo Editorial
Trucklo routes truck bodywork enquiries to manufacturers who build them.