W skrócie
- Start with the load: its weight, volume and how it is loaded. The chassis follows from that.
- Payload is GVW minus the weight of chassis, body, equipment, fuel and driver.
- EU categories: N1 up to 3.5 t, N2 from 3.5 to 12 t, N3 above 12 t. A category B licence covers vehicles up to 3.5 t.
- Wheelbase decides body length and axle load distribution. Chassis makers publish body builder guidelines.
- 3.5 t limit of category N1 and a B licence
- 12 t boundary between N2 and N3
- 4.00 m maximum vehicle height in the EU
Vehicle classes and typical bodies
The categories come from EU vehicle type-approval rules (Regulation (EU) 2018/858).
| Category | GVW | Typical bodies |
|---|---|---|
| N1 | up to 3.5 t | box, insulated, dropside, car transporter for vans |
| N2 | 3.5 to 12 t | box with tail lift, distribution reefer, dropside with crane |
| N3 | above 12 t | tipper, hooklift, curtainsider, tanker, reefer |
Payload: calculate before ordering
Payload is the difference between GVW and the vehicle's ready-to-drive weight. To the chassis weight add the body, equipment (tail lift, crane, unit), fuel and driver. Example: a 12 t chassis weighs 4.3 t, a box body with tail lift 1.9 t, driver and fuel 0.3 t. That leaves 5.5 t for the load.
Vehicles up to 3.5 t have little margin. A heavy body can take half of the available payload, which is why light materials are the usual choice here.
Wheelbase and axle loads
Wheelbase sets the body length and rear overhang. Too long an overhang overloads the rear axle and unloads the front one, which hurts handling. Chassis makers publish body builder guidelines with permitted overhangs, subframe mounting points and the electrical interface. A good body builder calculates axle loads for the empty and the loaded vehicle.
Order of decisions
- Load: weight, volume, loading method
- Body and equipment: type, dimensions, tail lift, crane, unit
- GVW and category: taking drivers' licences into account
- Chassis: wheelbase, power take-off, number of axles
- Check: payload and axle loads calculated by the builder
Frequently asked questions
How do I calculate the payload of a vehicle with a body?
Subtract the weight of chassis, body, equipment, fuel and driver from the GVW. The result is the load you can carry.
Which body suits a 3.5 t van chassis?
Usually a light box, an insulated body or an aluminium dropside. At 3.5 t every kilogram of tare weight counts.
Should the chassis be chosen before the body?
Better the other way round. Load and body first, then a chassis with the right GVW and wheelbase.
Sources
- EUR-Lex: Regulation (EU) 2018/858 (approval and market surveillance of motor vehicles and trailers)
- EUR-Lex: Council Directive 96/53/EC (weights and dimensions of road vehicles)
Trucklo routes truck bodywork enquiries to manufacturers who build them.