Skip to content
For buyers

How to protect a truck body from corrosion and damage

Galvanising, e-coating, powder coating, material choice and a design with no water traps. Plus parts that protect the body from impacts.

Trucklo editorial team Updated: · 3 min read
How to protect a truck body from corrosion and damage

W skrócie

  • Bodies suffer mostly from road salt, moisture trapped in gaps, aggressive loads and damaged coatings.
  • Protection is planned in the spec: hot-dip galvanising, e-coating, powder coating, materials and drainage.
  • Steel in contact with aluminium without insulation speeds up galvanic corrosion.
  • Washing after winter and touching up chips quickly extend coating life.
  • C1–C5, CX environmental corrosivity categories under ISO 12944-2

Protection methods

MethodWhere it worksNotes
Hot-dip galvanisingsubframe, steel partsdurable but adds weight
E-coating (KTL)steel parts with complex shapesprotects recesses well, often a primer under powder coat
Powder coatingsides, visible partsappearance plus an extra protective layer
Aluminium, stainless steelsides, boxes, fittingscorrosion-resistant, need insulating from steel
Designdrains, no water traps, sealinga design decision, not a service fix

Operating environment and spec

A tipper hauling fertiliser or salt works in different conditions from a box body in urban distribution. Describe the environment in the enquiry: load type, washing, winter road treatment, coastal work. ISO 12944-2 defines environmental corrosivity categories from C1 (very low) to C5 (very high) and CX (extreme). It helps match the coating system to conditions and expected durability.

Mechanical damage

Buffers, rub rails, corner guards and reinforced lower door edges limit damage from dock and forklift impacts. Floor protection plates in drive-on zones protect the floor. These parts are easy to replace; replacing a panel or a wall is a major repair.

Care

  • Wash the chassis and body: especially after winter and chemical loads
  • Touch up chips: before corrosion creeps under the coating
  • Check drains and seals: so water does not stand in profiles
  • Check steel–aluminium joints: insulating washers, sealant condition

Frequently asked questions

How do I protect a body from corrosion?

In the spec: galvanising or e-coating for steel, powder coating, corrosion-resistant materials and a design with no water traps. Then washing and quick touch-ups.

Does aluminium rust?

It does not rust like steel, but it corrodes, especially in contact with uninsulated steel and in the presence of salt.

What does corrosivity category C5 mean?

Very high environmental corrosivity under ISO 12944-2. Only CX is higher.

Sources

  1. ISO 12944-2:2017 Corrosion protection of steel structures: classification of environments

Find the right producer

See what we have prepared for you.

Wyślij zapytanie Gotowe od ręki
Trucklo Editorial
Trucklo routes truck bodywork enquiries to manufacturers who build them.